Kappa Data

Extreme Certified Professional in ExtremeWireless Cloud, 30/08/2024
2024-08-30 09:00 - 17:00 UTC | Microsoft Teams
To obtain the ECP certificate, you need to fulfil two conditions. If you meet all the conditions, you can get the ECP certificate by completing the following two steps:
Step 1: You pass the multiple-choice exam of ECP in ExtremeWireless Cloud. This exam tests both your theoretical knowledge of the technology and the product.
Step 2: You participate in the assessment day. Here, your technical knowledge and experience will be tested in practice through lab exercises.

Mandatory requirements
You hold the following valid certificates:
ExtremeWireless Cloud – Installation & Configuration
ExtremeWireless Cloud – Management
ExtremeWireless Cloud – Advanced Configuration
ExtremeWireless Cloud – Troubleshooting
Finally, you have also passed the ECP theoretical exam. Unfortunately, if you do not meet any of these requirements, you will not be able to participate in the ECP assessment.

Location
This is a virtual classroom exam.

Practical
On the day of the ECP assessment, students are given about 3 hours of free lab practice before the official time starts running. The lab exercises will be released just before the start time and students will work on them alone. At the end, the assessing ATP will grade the assessment. If you pass this assessment, you will earn the title of Extreme Certified Professional in ExtremeWireless Cloud.

Exam objective
Upon completion of this course, students will have completed their theoretical and practical knowledge and skills in all aspects of the four ExtremeWireless Cloud training courses. Upon passing this assessment, students will become an Extreme Certified Professional in ExtremeWireless Cloud.

Agenda
09:00: Start free exploration lab environment
12:30: Lunch break
13:30: Practical exam
17:00: End of exam

Trainer
Bert Verschaeve, Certified Trainer for Extreme Networks

Price
€450 EUR
Maximum of 4 persons. Register now
Register now

Notice: JavaScript is required for this content.

Whalebone Immunity: Generate up to 8x more leads, 05/09/2024
2024-09-05 10:00 - 11:00 UTC | Go to meeting or Go to webinar
In Q1 2024, we tested new messaging for Whalebone Immunity, along with an updated sales pitch and associated materials. This new approach has increased the number of leads from events by a factor of 8, and our 1-to-1 conversations with potential customers have become significantly more effective.
We would like to invite you to a webinar where we will share our experiences so that you can improve your sales too. Following the webinar, the padel event is an opportunity to meet the people of Whalebone.
Agenda

10:00-10:05 am: Introduction
10:05-10:15: Approach explained
10:15-10:30: Sales pitch demonstration
10:30-10:45 am: Q&A

Audience
This webinar is specially created for existing and new partners.
Speaker
Adam Wright, Whalebone
Price
This webinar is offered free of charge by Kappa Data and Whalebone Schrijf je in Schrijf je hier in!

ExtremeWireless Cloud Training | Installation & Configuration, 10-11/09/2024
2024-09-10 09:00 - 2024-09-11 17:00 UTC | Kappa Data Nederland, Atoomweg 63, Utrecht, 3542 AA
This course provides the knowledge and skills needed to implement Extreme Networks’ ExtremeCloud IQ – Controller. Students experience the implementation process from start to finish and learn all essential steps and technologies. Lectures are supported with hands-on experience with ExtremeCloud IQ – Controller and relevant access points. Successful completion results in an operational WLAN with Open SSIDs, encryption and authentication, configuration settings, AP discovery and device profiles used in creating and managing Sites in ExtremeCloud IQ – Controller.

Objectives
After completing this training, you will have gained the knowledge to:

Deploy ExtremeCloud™ IQ – Controller based on reference architectures from Extreme Networks customer scenarios
Earn a learning credential on the Professional Program training path

Target Audience
This course is intended for anyone who installs and configures wireless networks using ExtremeCloud IQ Controller. This course is the mandatory first step towards professional certification.
Of course, anyone interested in ExtremeCloud IQ Controller is welcome!

Agenda

ExtremeCloud™ IQ – Controller Overview
Model Familiarization
Initial Setup
Initial ExtremeCloud™ IQ – Controller Configuration
Access Point Adoption
Sites
Wireless LAN
Open SSID
WLAN with Authentication
Availability
Monitoring
Tools

What should you bring?
Make sure you have a laptop with you, it will be needed for the hands-on labs. If possible, also bring a console cable.

Trainer
Matts Koppen, certified trainer for Extreme Networks.

Location
The training will be held at our Utrecht office.
Atoomweg 63
3542 AA Utrecht
The Netherlands

Price
1300€/per person Register now!
Register now!

Notice: JavaScript is required for this content.

Extreme Switching | Installation, Configuration & Management 18-20/09/2024
2024-09-18 09:00 - 2024-09-20 17:00 UTC | Microsoft Teams
Students will learn methods to properly deploy and configure their switching and routing environments using the ExtremeXOS/SwitchEngine CLI. This knowledge will be reinforced by actual hands-on experience with networking equipment in a laboratory environment, where students will perform real tasks.

Target Audience
This course is designed as the first step for individuals responsible for installing, configuring and managing the Extreme Networks family of ExtremeXOS/SwitchEngine switches.

Prerequisites
The Welcome Series “Getting to Know Extreme Switching” is a required prerequisite and must be completed before attending the Installation and Configuration training. Students should have a solid understanding of LAN concepts, including switching and routing, advanced Ethernet concepts and an introductory course in TCP/IP.
https://dojo.extremenetworks.com/courses/welcome-series-meet-extreme-switching/

Objectives
Upon completion of this course, students will have acquired the operational knowledge to:
Understand Layer 2 mechanisms and ways to implement and configure them in ExtremeXOS/SwitchEngine devices.
Understand Layer 3 mechanisms and ways to implement and configure them in ExtremeXOS/SwitchEngine devices.
Obtain a learning credential on the Professional Program training track.

Agenda
The following topics will be covered during this 3-day training:

Layer 2 Operations.
VLAN Principles and Operations
Discovery Protocols
L2 Loop Prevention and Redundancy
Spanning Tree Protocol
Link Aggregation
MLAG
EAPS, ERPS
ELRP, SLPP Guard
Layer 3 Operations
Routing Overview
Static Routing
VR, VRF
Gateway Redundancy
OSPF
IP Multicast
PIM
IPv6 Operations

Trainer
Certified trainer for Extreme Networks.

Location
This is a virtual classroom training, but can also be organized at one of Kappa Data’s locations.

Capacity
Maximum of 4 people
Price
€1800 per person Schrijf je in
Register now

Notice: JavaScript is required for this content.

ExtremeWireless Cloud Training | Management, 24/09/2024
2024-09-24 09:00 - 17:00 UTC | Kappa Data Nederland, Atoomweg 63, Utrecht, 3542 AA
You will learn how to manage your wireless network with ExtremeCloud IQ. This knowledge is reinforced by hands-on experience with networking equipment in a lab environment, where you will perform hands-on tasks.

Pre-requisite
The pre-requisite for this training: ExtremeWireless Cloud – Installation and Configuration certification.

Public
This course is for personnel who are responsible for managing a wireless network with ExtremeCloud IQ.
Of course everyone who is interested in ExtremeCloud IQ is welcome!

Course Objectives
Upon completion of this course, students will have gained the working knowledge to:

Administer the global settings of your ExtremeCloud IQ account
Manage Aps on your network
Work with ExtremeCloud IQ Logs
Use ML Insights to monitor your wireless network

Agenda

Network Management
Administration
Working with Logs
Review Management Servers
Certificate Management
ML Insights
User Management

What should you bring with you?
Make sure you bring your laptop, it will be necessary for the hands-on labs. If possible, also bring a console cable.

Trainer
Matts Koppen, Pre-sales Engineer at Kappa Data, is a certified trainer for Extreme Networks’ portfolio, among others. He will guide this workshop.

Location
This event will take place at the offices of Kappa Data Netherlands in Utrecht.
Atoomweg 63
3542 AA Utrecht
Netherlands

Price
750€/per person Register now!
Register now!

Notice: JavaScript is required for this content.

Extreme Fabric - Installation & Configuration Training, 24-26/09/2024
2024-09-24 09:00 - 2024-09-26 17:00 UTC | Microsoft Teams
The goal of the course is to provide students with the proper knowledge to properly install and configure Extreme Networks’ Fabric Connect. Students experience the deployment process from start to finish and learn all the essential steps and technologies. Lessons are equally supported by hands-on experience on Universal Hardware switches. Successful completion results in an operational SPBM fabric with L2VSN, L3VsN, IP-Shortcuts, Fabric Attach and vIST Core Switch Pair.
Target Audience
This course is designed as the first step for individuals responsible for installing, configuring and managing Extreme Networks Fabric Connect switches.

Requirements
The Welcome Series “Get to Know Extreme Fabric Connect” is a required prerequisite and must be completed before attending the Installation and Configuration training.Students should have a solid understanding of LAN concepts, including switching and routing, advanced Ethernet concepts and an introductory course in TCP/IP.
https://dojo.extremenetworks.com/courses/welcome-series-extreme-fabric-connect/

Objectives
Upon completion of this course, students will have acquired the operational knowledge to:

Implement Extreme Networks’ Fabric Connect solutions based on reference architecture of Extreme Networks customer scenarios
Pass the Extreme Fabric – Installation and Configuration exam.

Agenda
During this 3-day training course, the following topics will be covered:
Extreme Fabric Overview

Shortest Path Bridging

IS-IS routing

Extreme Fabric Services

VSP Switch Management

Switching Portfolio

Software Management and Upgrade

Management Interfaces

Fabric Connect Infrastructure

BVLANs

IS-IS parameters, interfaces and adjacencies

Link resilience and VLACP

SPB Best practices

Fabric Deployment Options

Automation and on-boarding options

Auto-sense ports

Fabric Attach (FA)

FA Architecture

FA elements

FA configuration

Fabric Management

CFM

IP Shortcuts

Management CLIP

DHCP Server

Fabric Edge and Autosense

Fabric to the edge

Auto sense configuration

L2VSN

L2VSN configuration

UNI port condfiguration

Multicast

L3VSN

VRF Routing

Route Redistribution

Inter-VSN Routing

VIST Core Switch Pair

Redundancy on the edge of Fabric

SMLT Configuration

RSMLT

SLPP

Trainer
Certified trainer for Extreme Networks.

Location
This is virtual classroom training.

Number of participants
A maximum of 4 people can participate

Price
€1200 per person Schrijf je in
Schrijf je in

Notice: JavaScript is required for this content.

ExtremeWireless Cloud Training | Advanced Configuration, 25/09/2024
2024-09-25 09:00 - 17:00 UTC | Kappa Data Nederland, Atoomweg 63, Utrecht, 3542 AA
You will learn how to implement advanced configuration of ExtremeCloud IQ. This knowledge will be reinforced by hands-on experience with networking equipment in a lab environment, where you will perform real tasks. After participating in the training, you will be able to successfully complete the exam for the certificate.
Prerequisite
ExtremeWireless Cloud – Installation and Configuration certification is a mandatory requirement and must be completed before enrolling in ExtremeWireless Cloud – Advanced Configuration.
Target audience
This course is designed for personnel who want to learn about advanced ExtremeCloud™ IQ configuration options not covered in ExtremeWireless Cloud – Installation and Configuration.
Course Objectives
Upon completion of this course, students will have gained the working knowledge to:

Working with the ExtremeCloud IQ API.
Configuring Captive Web Portal.
Onboarding Switches and Routers.
Using the complementary CLI.

Training agenda

Captive Web portal
Switch templates, router settings and switch onboarding
Universal platform
Additional CLI
Network Policy Additional Settings
General Objects

Trainer
Matts Koppen (Pre-Sales Engineer | Kappa Data), certified trainer
Location
The training will be held at our Utrecht office.
Atoomweg 63
3542 AA Utrecht
Nederland
The agenda of this day goes as follows:
08.30 am – walk-in
09.15 am – Start Training
12.30 pm – Lunch
13.30 pm – Continuation Training
17:00 pm – End of Training
Be sure not to forget to bring your laptop!
Price
750€/per person Register now
Register now

Notice: JavaScript is required for this content.

ExtremeWireless Cloud Training | Installation, Configuration & Management, 25-26/09/2024
2024-09-25 09:00 - 2024-09-26 17:00 UTC | Kappa Data Nederland, Atoomweg 63, Utrecht, 3542 AA
In this ExtremeWireless Cloud – Installation and Configuration Training, you will learn how to deploy and configure a wireless network with ExtremeCloud IQ. This knowledge is reinforced by hands-on experience with network equipment in a lab environment, where you perform real tasks.

Target group
This course is intended for anyone who installs and configures wireless networks using ExtremeCloud IQ Controller. This course is the mandatory first step towards professional certification.

Prerequisites
Prerequisite for this course is the “Meet ExtremeCloud IQ” Welcome series. You can take this free course and certification exam at https://dojo.extremenetworks.com/courses/welcome-series-meet-extremecloud-iq/

Objectives
After completing this course, students will have acquired the operational knowledge to:
Create and manage an ExtremeCloud IQ account
Plan your network and add locations
Configure network policies and onboard devices
Create wireless networks and configure SSID authentication
Identify ExtremeCloud IQ Essentials applications

Agenda
The following topics will be covered during this 2-day course:
ExtremeCloud™ IQ – Controller Overview
WLAN Concepts and Protocols
Account Administration
Device Discovery and Provisioning
Switch Provisioning
Network Policy
802.1x with Remote Radius
Extreme’s Private Pre-Shared Key (PPSK)
Radio Profiles
Device Templates
Software Defined Radio (SDR)
Cloud Config Groups (CCG) & Classification Rules
Object Management
Deployment optimisation
Co Pilot
Extreme IoT Essentials
Extreme Air Defense
Extreme Guest Essentials
Extreme Location Essentials

What to bring
Make sure you have a laptop with you, it will be needed for the hands-on labs. If possible, also bring a console cable.

Trainer
Certified trainer for Extreme Networks.

Location
Kappa Data Netherlands office
Atoomweg 63, 3542 AA Utrecht

Price
1300€/per person Register now!
Register now!

Notice: JavaScript is required for this content.

Sophos Webinar on Upgrading XG Customers to the XGS Firewall, 26/09/2024
2024-09-26 10:00 - 10:30 UTC | Go to meeting or Go to webinar
Register for the Sophos webinar on Upgrading XG Customers to XGS Firewall on September 26, 2024.
Time is running out!
With the end of life (EOL) for Sophos XG Series hardware appliances approaching on March 31, 2025, it’s crucial to start planning now. Transition your customers to the latest XGS Series firewalls.
During a 30-minute exclusive Partner Webinar, we’ll provide all the insights and tools you need to make the upgrade process go smoothly.
Why Migration to XGS Firewall:
– Better Performance & Connectivity: Learn how the XGS hardware adapts to changing network requirements, ensuring better performance and reliability.
– Seamless Transition: Learn how the v20 MR2 simplifies the backup and recovery process with the new port assignment wizard.
– Easy to Use: Perform the transition without a steep learning curve-your customers can continue to use familiar software.
– Exclusive Discounts: Take advantage of promotions on hardware and software upgrades.

Takeaways from the Webinar:
– Critical reasons for the upgrade and its benefits.
– Different license migration paths tailored to your customers.
– Guidelines for performing the upgrade in various scenarios.
– Access to resources, frequently asked questions and exclusive discounts.
Equip yourself with the knowledge to smoothly upgrade your customers to the XGS Series. Don’t miss this essential session!

Language
Dutch

Speaker
Dirk Cipido – Business Development Manager | Kappa Data

Price
This webinar is offered free of charge by Sophos and Kappa Data Schrijf je in Schrijf je hier in!

Extreme Campus Fabric - Management, 27/09/2024
2024-09-27 09:00 - 17:00 UTC | Microsoft Teams
Managing Extreme Networks’ Fabric Connect is the goal of the course. Students will receive a detailed explanation of fabric services and will configure them in the lab. The latest automation features will be covered, including auto-sense ports and self-forming fabric. To provide insight into the management products offered by Extreme, students will gain experience on-boarding switches to both ExtremeCloud™ IQ and the ExtremeCloud IQ-SE (Site Engine) campus solution. Classes will be proportionally supported with hands-on experience on Universal Hardware switches.
Audience
This course is designed for network administrators, engineers and integrators responsible for configuring and managing Extreme Networks Fabric Connect switches.

Requirements
This training builds on the knowledge gained in the “Extreme Fabric – Installation and Configuration” training. To be eligible for certification in this course, you must first have earned the certificate from the previous course. Students should have a good understanding of SPBM concepts and general switch management.

Objectives
Upon completion of this course, students will have acquired the operational knowledge to:

Add/modify Fabric services and add devices to an existing Fabric Connect solution.
Use the new automation features, including auto-sense and self-forming fabric.
Understand Extreme’s management solutions: ExtremeCloud IQ and the campus solution ExtremeCloud IQ-SE (Site Engine), and successfully onboard and manage switches.

Agenda
During this 1-day training course, the following topics will be covered:
Campus Fabric Services Detail

Services Types

Uni Port Types

Multicast considerations

ExtremeCloud IQ Management

On-Boarding

Network Policy

Device Configuration

Supplemental CLI

Principles of Automation

Zero Touch Capabilities

Self-Forming Fabric Configuration

Auto-Sense port configuration

ExtremeCloud IQ-SE Management

ZTP+ and other device discovery methods

Secure Device Management

Discovery and Actions

Onboard VSP workflow

VOSS/FE Device Management

Trainer
Certified trainer voor Extreme Networks.

Location
This is virtual classroom training.

Number of participants
A maximum of 4 people can participate

Price
€450 per person Schrijf je in
Schrijf je in

Notice: JavaScript is required for this content.

Extreme Certified Professional in ExtremeControl, 30/09/2024
2024-09-30 09:00 - 17:00 UTC | Microsoft Teams
This 1-day assessment tests your practical knowledge of the four previous training modules:

Installation & Configuration

Management

Advanced Configuration

Troubleshooting

On the day of the ECP assessment, students get about 3 hours of free practice in the lab before the official time starts running. The lab exercises will be released just before the start time and students will work on them alone. At the end, the assessing ATP will grade the assessment. If you pass this assessment, you will earn the title of Extreme Certified Professional in ExtremeControl

Mandatory conditions
You hold the following valid certificates from the regular training programme:

ExtremeControl – Installation & Configuration

ExtremeControl – Management

ExtremeControl – Advanced Configuration
ExtremeControl – Troubleshooting

Finally, you also passed the Skills Analysis Track of the ECP in Extreme Fabric. This consists of a number of multiple-choice questions and tests your theoretical baggage.
https://dojo.extremenetworks.com/courses/extreme-skills-analysis-tool-extremecontrol-exam/
Unfortunately, if you do not meet any of these requirements, you cannot participate in the ECP assessment.

Location
This is a virtual classroom exam.

Trainer
Certified trainer for Extreme Networks

Number of participants
This training is provided for a maximum of 12 participants.

Price
€450 EUR Sign up
Sign up

Notice: JavaScript is required for this content.

ExtremeCloud IQ Site Engine | Installation & Configuration (incl. Management), 02-03/10/2024
2024-10-02 09:00 - 2024-10-03 17:00 UTC | Microsoft Teams
During this course, you will be introduced to network management and visibility using Extreme Networks’ management tool, ExtremeCloud IQ – Site Engine. Utilizing the Open Systems Interconnection (OSI) Network Management Model (NMM), these concepts are reinforced with a hands-on lab experience working with a pre-configured network. Students perform hands-on assignments on installation and basic configuration of ExtremeCloud IQ – Site Engine.

Target Audience
This course is intended as a first step for individuals responsible for installing and configuring the ExtremeCloud IQ – Site Engine.

Requirements
The Welcome Series “Get to Know ExtremeCloud IQ Site Engine” is a mandatory prerequisite and must be completed before you can attend the ExtremeCloud™ IQ – Site Engine – Installation and Configuration training. This welcome series is available here.
(https://dojo.extremenetworks.com/courses/welcome-series-meet-extremecloud-iq-site-engine/)

Objectives
Upon completion of this course, you will have gained the knowledge to:

Install ExtremeCloud IQ – Site Engine

Configure ExtremeCloud IQ – Site Engine

Access tools for device configuration

Attain overall network visibility in ExtremeCloud IQ Site Engine

Pass the ExtremeCloud IQ – Site Engine – Installation and Configuration exam

Agenda

During this 2-day training course, the following topics will be covered:

Introduction to ExtremeCloud IQ – Site Engine

Deploying and Installing ExtremeCloud IQ – Site Engine

Configuring ExtremeCloud IQ – Site Engine.

Administration

Device Onboarding

Visibility

Configuration Management

What should you bring?
Be sure to bring your laptop. It will be needed for the hands-on labs.

Trainer
Certified trainer for Extreme Networks.

Locatie
This is a virtual classroom training course

Price
800€/per person Schrijf je in
Schrijf je in

Notice: JavaScript is required for this content.

Webinar: UZTNA, AI & Fabric with Extreme Networks, 03/10/2024
2024-10-03 10:00 - 10:30 UTC | Go to meeting or Go to webinar
Register for the webinar on UZTNA & Artificial Intelligence with Extreme Networks on 3 October 2024.
In this exclusive 30-minute session, we will dive deeper into the power of Universal ZTNA and the latest developments in Artificial Intelligence with Extreme Networks. Get inspired by innovative technologies and stay tuned for the latest partner updates, including Partner Excellence badges.
What’s on the agenda?

Welcome speech by Rubin Zwanenburg – he will tell you more about Kappa Services, among other things.
Rafaël Lepoutre will tell you more about ExtremeCloud licensing.
Presales Engineer Frédéric Van Walle will give a 3×3 pitch about:

Extreme AI expert
UZTNA
Fabric

Ask our experts your questions.

Speakers
Rubin Zwanenburg – Sales Manager Netherlands
Frédéric Van Walle – Presales Engineer
Rafaël Lepoutre – Business Development Manager

Language
The webinar will be held in Dutch

Price
This webinar is offered free of charge by Extreme Networks and Kappa Data.

Don’t miss this unique opportunity and register today! Schrijf je in Schrijf je hier in!

ExtremeWireless Cloud Training | Troubleshooting, 08-09/10/2024
2024-10-08 09:00 - 2024-10-09 17:00 (Europe/Helsinki) | Kappa Data Nederland, Atoomweg 63, Utrecht, 3542 AA
You will learn to troubleshoot wireless networks using ExtremeCloud IQ. This knowledge is reinforced by hands-on experience with networking equipment in a lab environment, where you will perform real world tasks. The class is a fast-paced, error-based scenario lab that immerses students in real-life situations that require error diagnosis and remedial actions. It provides students with the information and skills needed to solve common WLAN problems using ExtremeCloud IQ tools and network solutions. After participating in the training, you will be able to successfully complete the exam for the certificate.
Prerequisite
ExtremeWireless Cloud – Installation and Configuration certification is a mandatory pre-requisite and must be completed before enrolling in ExtremeWireless Cloud – Troubleshooting
Target audience
This course is designed for networking professionals responsible for supporting and troubleshooting wireless LAN networks. This course is an advanced class that builds on the student’s real-world work experiences with ExtremeCloud™ IQ.
Course objectives
Upon completion of this course, students will have gained the knowledge to:

Troubleshoot wireless network problems
Use logs and files for troubleshooting
Explain Cooperative Control Protocols and CAPWAP and Provisioning.
Use the troubleshooting tools in ExtremeCloud IQ
Setting up SSH Proxy
Using the client monitor

Agenda of the training

Network Performance Troubleshooting
Troubleshooting Tools
Authentication and Roaming
Private pre-shared key (PPSK)
Private Pre-Shared Key Troubleshooting Tools
Client Monitor
SSH Proxy

Trainer
Matts Koppen (Pre-Sales Engineer | Kappa Data), certified trainer
Location
The training will be given at our office in Utrecht.
Atoomweg 63
3542 AA Utrecht
The Netherlands
Would you like to attend the training online? Please contact us.
The agenda of day 1 & 2 goes as follows:
08.30 am – walk-in
09.15 am – Start Training
12.30 pm – Lunch
13.30 pm – Continuation Training
17:00 pm – End of Training
Be sure not to forget to bring your laptop and Console cable!
Price
1300€/person Schrijf je in
Register here

Notice: JavaScript is required for this content.

Webinar: Managed SASE with Cato Networks, 08/10/2024
2024-10-08 10:00 - 10:45 UTC | Go to meeting or Go to webinar
Register now for the Managed SASE webinar with Cato Networks on October 8, 2024.
In a world where network security and performance are increasingly critical, Cato Networks offers a forward-looking solution with Secure Access Service Edge (SASE). Our webinar, “Managed SASE,” will help you understand how transitioning to a SASE architecture, combined with Cato Networks’ managed solution, can optimize and secure your network.
During this exclusive 45-minute session, we will cover:

Improved Performance & Connectivity: Discover how Cato’s cloud-native platform supports your network needs with enhanced security and performance.
Seamless Integration: Learn how easy it is to transform your existing infrastructure with Cato’s SASE solutions.
Simplified Management: Gain insights into how Cato Networks reduces network management complexity and centralizes security.

Webinar Takeaways:

The benefits of migrating to a SASE environment.
How Cato Networks offers seamless implementation.
Practical steps for managing your network with reduced complexity and greater efficiency.

Agenda

Introduction into Cato Networks
Answering: It would be nice if we could…

Manage all your accounts together
Focus on what’s important
Manage Upsells and Renewals
License Staging & Preconfiguration
Use Co-Branding features

Speaker:
Nick Leman – Business Development Manager | Cato Networks
Cost:
This webinar is offered free of charge by Cato Networks and Kappa Data. Schrijf je in Schrijf je hier in!

Barracuda CloudGen Firewall Training - CGF01, 09-11/10/2024
2024-10-09 09:00 - 2024-10-11 17:00 UTC | Kappa Data HQ, Grote Steenweg 18, De Pinte, Oost-vlaanderen, 9840
Audience
This technical training is intended for resellers and end-users that are new or who want to expand their knowledge of Barracuda’s Cloud-Gen firewall platform.

Prerequisites
Basic knowledge of TCP/IP and networking is recommended. This training requires the use of your own laptop.

Objective
In this training, you’ll learn how to configure, monitor and troubleshoot the various firewall components of the Barracuda Cloud-Gen firewalls that are typically used in today’s environments. This Training is NEW and now covers the course items of the former Barracuda Introduction and BTN300 Training.

Full Agenda
This is a 3-day, classroom-based training with both theory and exercises.
The training can also be followed online. Please let us know if you so desire.

Practicalities

Introducing the Barracuda CloudGen Firewall F
On-premise Deployment
Basic Configuration Tasks
Firewall Policies
Introduction to Cloud Generation Firewall F Features
High Availability
System Maintenance
Virtual Private Networks
Introduction to Remote Access
Logging, Reporting, Statistics
Introduction to Traffic Intelligence
CloudGen Control Center
IPv6 Configuration
Exam

Trainer
Cédric Délisse or Tom Uytterhaegen, certified trainers for Barracuda.

Evaluation
Evaluation is a continuous process at Kappa Data, so your feedback will be asked during the training. At the end of the training, you will also receive a full survey where you can add your feedback.

Price
€2250 per person Sign up
Sign up

Notice: JavaScript is required for this content.

Extreme Campus Fabric – Advanced Configuration, 10-11/10/2024
2024-10-10 09:00 - 2024-10-11 17:00 UTC | Microsoft Teams
This course provides an in-depth discussion of the advanced features of Extreme Networks’ Fabric Connect for integrating SPBM with other protocols and solution requirements. You will learn how to extend campus configuration by implementing Fabric Extend, including Fabric over SD-WAN. You will see how Distributed Virtual Routing (DvR) is used to optimize routing in the Fabric. Redistributing routes from outside protocols to IS-IS is discussed with routing policies. Lessons are supported by hands-on configuration of Universal Hardware 5520, 5320 and EXOS.
Target Audience
This course is designed for network administrators, support engineers and integrators responsible for the architecture and administration of Extreme Networks Fabric Connect switches and devices.

Requirements
This training builds on the knowledge gained in the “Extreme Fabric – Installation and Configuration” training.
Students should have a good understanding of SPBM concepts and general switch management.

Objectives
Upon completion of this course, students will have acquired the operational knowledge to:

Use Fabric Attach to configure fabric services.
Integrate other protocols and services with Fabric Connect.
Understand how to extend campus configuration by implementing Fabric Extend.

Agenda
During this 2-day training course, the following topics will be covered:
Distributed Virtual Routing (DvR)

Function and Operation

Domains, Controllers, Leaf Nodes

Host Entries IP Route Policy

VSP IP Routing

OSPF

Route Policies

Fabric Extend (FE)

FE Function and Operation

Extreme Access Platform Appliance

VXLAN, IPsec, NAT Traversal Configuration

Fabric over SD-WAN

SD-WAN onboarding

Fabric node onboarding

Application visibility and control

Extreme Integrated Application Hosting

Applications

Use cases

Multi-Area SPBM

Architecture

Configuration

QoS

Architecture

Filters

Traffic Management

Trainer
Certified trainer voor Extreme Networks.

Location
This is virtual classroom training.

Number of participants
A maximum of 4 people can participate

Price
€800 per person Schrijf je in
Schrijf je in

Notice: JavaScript is required for this content.

Extreme Certified Professional in Extreme Fabric, 11/10/2024
2024-10-11 09:00 - 17:00 UTC | Microsoft Teams

Extreme Switching | Installation, Configuration & Management 21-23/10/2024
2024-10-21 09:00 - 2024-10-23 17:00 UTC | Microsoft Teams
Students will learn methods to properly deploy and configure their switching and routing environments using the ExtremeXOS/SwitchEngine CLI. This knowledge will be reinforced by actual hands-on experience with networking equipment in a laboratory environment, where students will perform real tasks.
Target Audience
This course is designed as the first step for individuals responsible for installing, configuring and managing the Extreme Networks family of ExtremeXOS/SwitchEngine switches.
Prerequisites
The Welcome Series “Getting to Know Extreme Switching” is a required prerequisite and must be completed before attending the Installation and Configuration training. Students should have a solid understanding of LAN concepts, including switching and routing, advanced Ethernet concepts and an introductory course in TCP/IP.
https://dojo.extremenetworks.com/courses/welcome-series-meet-extreme-switching/
Objectives
Upon completion of this course, students will have acquired the operational knowledge to:
Understand Layer 2 mechanisms and ways to implement and configure them in ExtremeXOS/SwitchEngine devices.
Understand Layer 3 mechanisms and ways to implement and configure them in ExtremeXOS/SwitchEngine devices.
Obtain a learning credential on the Professional Program training track.
Agenda
The following topics will be covered during this 3-day training:

Layer 2 Operations.
VLAN Principles and Operations
Discovery Protocols
L2 Loop Prevention and Redundancy
Spanning Tree Protocol
Link Aggregation
MLAG
EAPS, ERPS
ELRP, SLPP Guard
Layer 3 Operations
Routing Overview
Static Routing
VR, VRF
Gateway Redundancy
OSPF
IP Multicast
PIM
IPv6 Operations

Trainer
Certified trainer for Extreme Networks.
Location
This is a virtual classroom training, but can also be organized at one of Kappa Data’s locations.
Capacity
Maximum of 8 people
Price
€1200 per person Schrijf je in
Register now

Notice: JavaScript is required for this content.

Extreme Certified Professional in Extreme Fabric, 24/10/2024
2024-10-24 09:00 - 17:00 UTC | Microsoft Teams

Extreme Campus Fabric - Troubleshooting, 24-25/10/2024
2024-10-24 09:00 - 2024-10-25 17:00 UTC | Microsoft Teams
Extreme Networks’ Fabric Connect is an advanced, reliable and high-performance networking solution. This training course goes over the technologies that support fabric operation and services, highlighting proper operation and methods to determine misconfigurations. Identifying problems at network layer 1, layer 2 and layer 3 is discussed, along with how to troubleshoot fabric service problems. Classes are proportionally supported by hands-on troubleshooting activities on Universal Hardware 5520, 5320 and EXOS.
Target Audience
This course is designed for network administrators, support engineers and integrators responsible for managing and troubleshooting Extreme Networks Fabric Connect switches and devices.

Requirements
This training builds on the knowledge gained in the “Extreme Fabric – Installation and Configuration” training.To be eligible for certification in this course, you must first have earned the certificate from the previous course. Students should have a good understanding of SPBM concepts and general switch management.

Objectives
Upon completion of this course, students will have acquired the operational knowledge to:

Use specific tools from VOSS to troubleshoot Fabric Connect issues.
Set up the management network correctly and identify problems that may arise.
Identify a correctly configured SPBM node and locate problems at Layer 1 and 2.
Explain how to identify and resolve fabric service problems.

Agenda
During this 2-day training course, the following topics will be covered:
VSP Tools

Switch Boot and Image

Switch Logs

Key Health Indicators and Status

Switch Management and On-Boarding

OSS Segmented Management Config and Issues

Fabric Management using GRT and CLIP

Examining the Onboarding Proces

Link Configuration and Issues

GigabitEthernet Port Configuration

Link Layer Discovery Protocol LLDP

Fabric Connect IS-IS/SPBM Infrastructure

IS-IS and SPBM Configuration Issue

Virtual Link Aggregation Control Protocol VLACP

VIST Core Switch Pair Config and Issue

Campus Fabric Services Troubleshooting

Layer 2 VSN Config and Issue

IP-Shortcuts Config and Issues

Layer 3 VSN Config and Issues

InterVSN Routing Config and Issue

IP Multicast Config and Issue

Trainer
Certified trainer voor Extreme Networks.

Location
This is virtual classroom training.

Number of participants
A maximum of 4 people can participate

Price
€800 per person Schrijf je in
Schrijf je in

Notice: JavaScript is required for this content.

Barracuda Catch-up - breakfast session, 29/10/2024
2024-10-29 08:30 - 10:00 (Europe/Helsinki) | Kappa Data Nederland, Atoomweg 63, Utrecht, 3542 AA
On 29 October 2024, Barracuda Networks and Kappa Data Netherlands are organising a breakfast session where we would like to invite you to join us to discover the latest developments in data protection. This session will cover the following topics:
Topics:

Barracuda Backup

New models
Exporting to Azure

Cloud-2-Cloud Backup

New: Entra ID backup

Data Inspector

Configuration and setup

Roadmap of Barracuda Networks

Speakers:

Raynaud Schokkenbroek, Barracuda Networks
Cedric Dellisse, Kappa Data Nederland

Take advantage of this unique opportunity to learn more about the latest innovations from Barracuda Networks, while enjoying a delicious breakfast. Schrijf je in
Schrijf je in

Notice: JavaScript is required for this content.

Kappa Data Cup: Padel, 29/10/2024
2024-10-29 15:00 - 19:30 (Europe/Helsinki) | HAL22, Zonnebaan 22, Utrecht, Utrecht, 3542 EE, Nederland
Welcome to the Kappa Data Cup: The Ultimate Sporting Event for the IT industry!
Are you ready to challenge your colleagues and other IT industry professionals in a sporting adventure? The Kappa Data Cup is the event where sportsmanship and networking come together. This unique tournament brings IT professionals together on the playing field, where they can not only show off their sporting skills, but also make new contacts and strengthen existing relationships.
Whether you are a seasoned athlete or just fancy a fun and active day with like-minded people, the Kappa Data Cup offers something for everyone. The perfect mix between fun and networking.
Join the Kappa Data Cup and experience a day full of sportsmanship, fun and valuable networking opportunities. Register today and show what you’ve got!

Schrijf je in We have the pleasure of inviting you to a sporty and fun afternoon during our Padel Event! This event is organised by Kappa Data NL and is the perfect opportunity to enjoy a great day together with colleagues, friends and other sports enthusiasts.
Programme
15:00 – 15:30 | Walk-in & welcoming guests
The doors of HAL22 are open to you. Reception with a warm welcome and the opportunity to get acquainted with the other participants.
15:30 – 17:30 | Padel
Time to hit the courts! Take part in our padel tournament or attend a clinic given by an experienced padel coach. Whether you are an experienced player or have never held a padel racket before, there is something for everyone.
17:30 – 19:30 | Drinks
After all the sporting efforts, it is time for relaxation. Enjoy a cosy get-together with snacks and drinks, where we can chat and conclude the day festively.
Location
HAL22 Zonnebaan 22, 3542 EE Utrecht Put 29 October in your diary for a great event full of Business & Pleasure! Register now!
We look forward to seeing you there!
Notice: JavaScript is required for this content.

Extreme Campus Fabric - Installation & Configuration Training, 04-06/11/2024
2024-11-04 09:00 - 2024-11-06 17:00 UTC | Microsoft Teams
The goal of the course is to provide students with the proper knowledge to properly install and configure Extreme Networks’ Fabric Connect. Students experience the deployment process from start to finish and learn all the essential steps and technologies. Lessons are equally supported by hands-on experience on Universal Hardware switches. Successful completion results in an operational SPBM fabric with L2VSN, L3VsN, IP-Shortcuts, Fabric Attach and vIST Core Switch Pair.
Target Audience
This course is designed as the first step for individuals responsible for installing, configuring and managing Extreme Networks Fabric Connect switches.

Requirements
The Welcome Series “Get to Know Extreme Fabric Connect” is a required prerequisite and must be completed before attending the Installation and Configuration training.Students should have a solid understanding of LAN concepts, including switching and routing, advanced Ethernet concepts and an introductory course in TCP/IP.
https://dojo.extremenetworks.com/courses/welcome-series-extreme-fabric-connect/

Objectives
Upon completion of this course, students will have acquired the operational knowledge to:

Implement Extreme Networks’ Fabric Connect solutions based on reference architecture of Extreme Networks customer scenarios
Pass the Extreme Fabric – Installation and Configuration exam.

Agenda
During this 3-day training course, the following topics will be covered:
Extreme Fabric Overview

Shortest Path Bridging

IS-IS routing

Extreme Fabric Services

VSP Switch Management

Switching Portfolio

Software Management and Upgrade

Management Interfaces

Fabric Connect Infrastructure

BVLANs

IS-IS parameters, interfaces and adjacencies

Link resilience and VLACP

SPB Best practices

Fabric Deployment Options

Automation and on-boarding options

Auto-sense ports

Fabric Attach (FA)

FA Architecture

FA elements

FA configuration

Fabric Management

CFM

IP Shortcuts

Management CLIP

DHCP Server

Fabric Edge and Autosense

Fabric to the edge

Auto sense configuration

L2VSN

L2VSN configuration

UNI port condfiguration

Multicast

L3VSN

VRF Routing

Route Redistribution

Inter-VSN Routing

VIST Core Switch Pair

Redundancy on the edge of Fabric

SMLT Configuration

RSMLT

SLPP

Trainer
Certified trainer for Extreme Networks.

Location
Kappa Data Nederland
Atoomweg 63
3542 AA Utrecht

Number of participants
A maximum of 4 people can participate.

Price
€1800 per person Schrijf je in
Schrijf je in

Notice: JavaScript is required for this content.

ExtremeCloud IQ Site Engine – Advanced Configuration Training, 04-06/11/2024
2024-11-04 09:00 - 2024-11-06 17:00 UTC | Microsoft Teams
In this training you will gain more advanced knowledge of ExtremeCloud IQ – Site Engine tools such as templates, workflows, automations and integration with ExtremeCloud IQ.
You’ll learn more about using ExtremeAnalytics, Extreme Policy Manager and ExtremeControl. Course participants will also be introduced to ExtremeControl Workflows built into ExtremeCloud IQ Site Engine, as well as integration with Extreme Connect and introduction to APIs. These concepts are reinforced with a hands-on lab with a pre-configured network.

Target Audience
This training is for engineers responsible for managing networks using ExtremeCloud IQ – Site Engine, Extreme Analytics, Extreme Policy and ExtremeControl.

Requirements
This training builds on the knowledge gained in the “ExtremeCloud IQ Site Engine – Installation and Configuration” training. To be eligible for certification in this training, you must first have obtained the certificate from the previous training.

Objectives
Upon completion of this course, you will have gained this knowledge:

Using templates within ExtremeCloud IQ – Site Engine.
Using workflows within ExtremeCloud IQ – Site Engine
Designing workflows and automations
Integrating third parties with ExtremeCloud IQ – Site Engine
Gain knowledge around ExtremeAnalytics, Extreme Policy and ExtremeControl

Agenda
During this 3-day training course, the following topics will be covered:

Configuration Tools
Templates
ExtremePolicy
ExtremeControl
Extreme Analytics
Workflows

GitHub

Northbound Interface
XIQ-SE Connect
Alarms and Events

Trainer
Certified trainer for Extreme Networks.

Location
This is a virtual classroom training course

Capacity
A maximum of 8 people can register for this course

Price
€1200 per person Schrijf je in
Schrijf je in

Notice: JavaScript is required for this content.

ExtremeCloud IQ Site Engine – Troubleshooting Training, 07/11/2024
2024-11-07 09:00 - 17:00 UTC | Microsoft Teams
Students will gain visibility into the troubleshooting procedures and tools available within ExtremeCloud™ IQ – Site Engine to resolve network outages and common end-user issues. The concepts addressed in this training are also reinforced by a hands-on lab.

Target Audience
This training is designed for engineers responsible for networks using ExtremeCloud IQ – Site Engine, ExtermeAnalytics, Extreme Policy and ExtremeControl.

Requirements
This training builds on the knowledge gained in the “ExtremeCloud IQ Site Engine – Installation and Configuration” training.To be eligible for certification in this training, you must first have obtained the certificate from the previous training.

Objectives
Upon completion of this course, you will have gained this knowledge:

Identify and isolate network faults
Identify and isolate end-user problems
Creating alarms and reports

Agenda
The following topics will be covered during this 1-day training:

Basic troubleshooting concepts.
Managing failures and issues within ExtremeCloud IQ – Site Engine
Monitoring and managing performance issues
Creating and managing alarms
Creating and managing reports

Trainer
Certified trainer for Extreme Networks.

Location
This is virtual classroom training.

Capacity
A maximum of 8 participants can register for this training.

Price
450€/per person Schrijf je in
Schrijf je in

Notice: JavaScript is required for this content.

Extreme Certified Professional in ExtremeWireless Cloud, 08/11/2024
2024-11-08 09:00 - 17:00 UTC | Microsoft Teams

Extreme Switching - Advanced Configuration, 11-12/11/2024
2024-11-11 09:00 - 2024-11-12 17:00 UTC | Microsoft Teams
Students will learn methods to enhance their existing switching and routing environment with security, traffic optimisation, automation and integration functions. Various network management tasks will be practised. This knowledge will be reinforced by actual hands-on experience with networking equipment in a laboratory environment, where students will perform real tasks.

Target audience
Designed as a knowledge enhancement with a focus on optimization, this course is aimed at individuals responsible for implementing and maintaining the Extreme Networks family of ExtremeXOS/SwitchEngine switches.

Requirements
This training builds on the knowledge gained in the “Extreme Switching – Installation and Configuration” training. To be eligible for certification in this course, you must first have earned certification in the previous course. Students should have a solid understanding of LAN concepts, including switching and routing, advanced Ethernet concepts and an introductory course in TCP/IP.

Objectives
Upon completion of this course, students will have acquired the operational knowledge to:

Implement security mechanisms in ExtremeXOS/SwitchEngine devices, such as ONEPolicy or ACLs.
Implement traffic optimization techniques, such as Quality of Service.
Automate, integrate and enhance ExtremeXOS/SwitchEngine capabilities with features such as Fabric Attach, CLI scripting, as well as Python scripting and Python processes.
Achieve a learning credential on the Professional Program training track.

Agenda
During this 2-day training course, the following topics will be covered:
Security

EXOS Security Overview

Authentication, Authorization and Accounting

Access Control List

Policy

Optimization

Traffic Optimization

Automation

Fabric Attach

Application Telemetry

Integrated Application Hosting

Trainer
Certified trainer for Extreme Networks.

Location
This is virtual classroom training.

Capacity
Maximum 8 people.

Price
€800 per person
Schrijf je in
Schrijf je in

Notice: JavaScript is required for this content.

Kappa Day Nederland 2024
2024-11-12 15:00 - 20:00 (Europe/Brussels) | Louis Hartlooper Complex, Tolsteegbrug 1, Utrecht, Utrecht, 3511 ZN, Netherlands
Last year, we enjoyed snacks, drinks and valuable conversations during Kappa Day. The presentations given provided new insights and opportunities.
This year we, Kappa Data Netherlands, are going to step it up a notch. We would like to invite you to join us in Utrecht on 12 November for Kappa Day 2024. In the beautiful authentic Louis Hartlooper Complex, we will have a fun day together. It is a completely new concept that we will immerse ourselves in together with you. We look forward to your presence!
Register for Kappa Day and be the first to receive more information! Schrijf je in Put 12 November in your diary for a great event full of Business & Pleasure! Register now for Kappa Day 2024!
We look forward to seeing you there!
Notice: JavaScript is required for this content.

Extreme Switching – Troubleshooting, 13-14/11/2024
2024-11-13 09:00 - 2024-11-14 17:00 UTC | Microsoft Teams
Students will learn troubleshooting methodology as well as the troubleshooting toolbox available to network engineers and ExtremeXOS/SwitchEngine administrators. This knowledge will be reinforced by actual hands-on experience with networking equipment in a laboratory environment, where students will perform real tasks

Target audience
This course is aimed at individuals responsible for maintaining and troubleshooting the Extreme Networks family of ExtremeXOS/SwitchEngine switches.

Requirements
This training builds on the knowledge gained in the “Extreme Switching – Installation and Configuration” training. To be eligible for certification in this course, you must first have earned certification in the previous course. Students should have a solid understanding of LAN concepts, including switching and routing, advanced Ethernet concepts and an introductory course in TCP/IP.

Objectives
Upon completion of this course, students will have acquired the operational knowledge to:

Determine if a problem is network related or not.
Diagnose ExtremeXOS/SwitchEngine and the network with built-in tools.
Troubleshoot common problems.
Collect support data and open a case at GTAC.
Obtain a learning credential on the Professional Program training track.

Agenda
Tijdens deze 2-daagse training komen volgende onderwerpen aan bod:

Troubleshooting Mindset

Troubleshooting Toolset

L1 Network Issues

L2 Network Issues

L3 Network Issues

GTAC Case Preparation

Trainer
Certified trainer for Extreme Networks.

Location
This is virtual classroom training.

Capacity
Maximum 8 people.

Price
€800 per person
Schrijf je in
Schrijf je in

Notice: JavaScript is required for this content.
